Eth Bridge Macadd - Technicolor TG670 Cli Reference Manual

eth bridge macadd

Add a static MAC address to a bridge interface.
SYNTAX:
eth bridge macadd
where:
brname
intf
hwaddr
vlan
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
[brname = <{bridge}>]
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4|WLAN|virt|vdsl2}>
hwaddr = <hardware-address>
[vlan = <{default|wan|dmz|guest}>]
The name of a bridge instance.
The name of the bridge interface.
The ethernet MAC address of the new entry.
The VLAN.
ETH COMMANDS
OPTIONAL
REQUIRED
REQUIRED
OPTIONAL
379