Dhcp Client Debug Traceconfig - Technicolor TG670 Cli Reference Manual

DHCP COMMANDS

dhcp client debug traceconfig

Modify DHCP client trace configuration
SYNTAX:
dhcp client debug traceconfig
where:
state
144
[state = <{disabled|enabled}>]
Enable/Disable tracing.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
OPTIONAL