ETH COMMANDS
eth filter operand ipprotoadd
Add another ip protocol in the set.
SYNTAX:
eth filter operand ipprotoadd
where:
operand
ipprotocol
418
operand = <{}>
ipprotocol = <number{0-255}>
The name of an operand.
The IP protocol to add.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
REQUIRED
REQUIRED