Service System Mapadd - Technicolor TG670 Cli Reference Manual

SERVICE COMMANDS

service system mapadd

Add a port map for a service.
SYNTAX:
service system mapadd
where:
name
intf
port
942
name = <{PPTP|HTTP|HTTPs|webservice|HTTPI|FTP|
SSH|TELNET|DNS-S|SNMPV3_AGENT|MDAP|SSDP}>
intf = <{loop|ipsec0|Internet|lan1|wan1|dmz1|
guest1}>
port = <{undefined|at-echo|at-nbp|at-rtmp|at-
zis|auth|bgp|biff|bootpc|finger|ftp|ftp-data|
gopher|h323|httpproxy|ike|ils|imap2|imap3|
ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|
ldap|login|netbios-dgm|netbios-ns|netbios-
ssn|netwall|netware-ip|new-rwho|nfds|nicname|
nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|
qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|
sunrpc|syslog|systat|talk|telnet|time|timed|
tftp|ulistserv|utime|uucp|uucp-rlogin|who|www-
http|whoami|xwindows} or number>
The name of the service for this map.
The interface for this map.
The port for this map.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
REQUIRED
REQUIRED
REQUIRED