Pptp Ifadd - Technicolor TG670 Cli Reference Manual

pptp ifadd

Adds a PPTP profile (backwards compatible with previous release, use profiles
SYNTAX:
pptp ifadd
where:
dest
rate
encaps
ac
To enable/disable LPD service.
SYNTAX:
pptp ifadd
where:
state
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
dest = <string>
[rate = <number{10-10000}>]
[encaps = <{vcmux|nlpid}>]
[ac = <{never|always|keep}>]
To enable/disable LPD service. = <{never|
always|keep}>
The WAN destination for this PPTP tunnel. Typically a
phonebook name.
Transmit speed in kbits/s for the WAN link.
The WAN protocol encapsulation.
Enable/disable sending address and control field (0xFF03)
on the WAN link.Command: printersharing LPD config
Syntax : config [state = <{disabled|enabled}>]
[state = <{disabled|enabled}>]
Enabled/disabled LPD printer service.
PPTP COMMANDS
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
REQUIRED
OPTIONAL
821