Router Rip Ifsecauthconfig - Technicolor TG670 Cli Reference Manual

ROUTER COMMANDS

router rip ifsecauthconfig

Specifies the used secondary interface authentication
SYNTAX:
router rip ifsecauthconfig
where:
intf
type
password
id
key
generate-start
generate-stop
accept-start
accept-stop
898
intf = <{Internet|dmz1|guest1|ipsec0|lan1|
wan1}>
type = <{none|simple|md5}>
password = <password>
id = <number{0-255}>
key = <password>
[generate-start = <UTC format dd/mm/yyyy
hh:mm:ss>]
[generate-stop = <UTC format dd/mm/yyyy
hh:mm:ss>]
[accept-start = <UTC format dd/mm/yyyy
hh:mm:ss>]
[accept-stop = <UTC format dd/mm/yyyy
hh:mm:ss>]
Specifies the physical interface which is going to be
configured.
The type of authentication
Rip simple authentication key
Unique id number sent in clear text
Rip MD5 authentication key
Specifies the time at which the MD5 key will start to be
generated
Specifies the time at which a MD5 key will cease to be
generated
Specifies the time at which a MD5 key will start to be
accepted
Specifies the time at which a MD5 key will cease to be
accepted
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
REQUIRED
REQUIRED
REQUIRED
REQUIRED
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL