Sla Ping Modify - Technicolor TG670 Cli Reference Manual

sla ping modify

Modify ping test configuration
SYNTAX:
sla ping modify
where:
test
addr
dstport
srcport
size
timeout
count
datafill
frequency
maxrow
storagetype
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
test = <{IGDPing}>
[addr = <string>]
[dstport = <number{1-65535}>]
[srcport = <number{1-65535}>]
[size = <number{0-20000}>]
[timeout = <number{1-2147483646}>]
[count = <number{1-15}>]
[datafill = <quoted string>]
[frequency = <number{0-65535}>]
[maxrow = <number{0-50}>]
[storagetype = <{volatile|nonVolatile}>]
[trap = <[+/-]flag[+/-flag...]{probeFailure
testFailure testCompletion}>]
[trapprobefilter = <number{0-15}>]
[traptestfilter = <number{0-15}>]
[type = <{IcmpEcho|UdpEcho}>]
[descr = <quoted string>]
[srcaddr = <ip-address>]
[intf = <{none|loop|ipsec0|Internet|lan1|wan1|
dmz1|guest1|>]
[bypassrt = <{disabled|enabled}>]
[dsfield = <number{0-255}>]
[interval = <number{100-1000000}>]
[dontfragment = <{disabled|enabled}>]
The name of the ping test to configure.
The destination IP address.
The destination port.
The source port.
The size of the data portion to be transmitted in a ping
probe.
The timeout value, in milliseconds, for a ping operation
The number of times to send a ping probe.
The data fill pattern of a probe packet.
The number of seconds to wait before repeating a ping test.
The max number of entries in the history table.
The storage type of this entry.
SLA COMMANDS
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
951