Ppp Commands - Technicolor TG670 Cli Reference Manual

ppp Commands

ppp flush
ppp ifattach
ppp ifconfig
ppp ifdelete
ppp ifdetach
ppp iflist
ppp ifscan
ppp relay flush
ppp relay ifadd
ppp relay ifconfig
ppp relay ifdelete
ppp relay iflist
ppp relay sesslist
ppp rtadd
ppp rtdelete
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
Flush all PPP interfaces.
Attach a PPP interface.
Modify a PPP interface.
Delete a PPP interface.
Detach a PPP interface.
Display the PPP interfaces.
Scan a PPP interface for available interfaces.
Remove all ethernet interfaces from the PPP
relay agent list and terminate all
Add an ethernet interface to the PPP relay list.
Modify an ethernet interface from the PPP relay
agent list.
Delete an ethernet interface from the PPP relay
agent list.
Display all ethernet interfaces added to the PPP
relay agent list.
Display all active PPP relay sessions.
Add a route to the routing table when PPP link
comes up.
Delete the route for a PPP link.
PPP COMMANDS
see page 802
see page 803
see page 804
see page 807
see page 808
see page 809
see page 810
see page 811
see page 812
see page 813
see page 814
see page 815
see page 816
see page 817
see page 818
801