ATM COMMANDS
atm oam modify
Modify the ATM OAM data blocking mode.
SYNTAX:
atm oam modify
where:
port
blocking
64
port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or
number>
blocking = <{disabled|enabled}>
The port for which OAM blocking is configured.
Enable/disable OAM blocking.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
REQUIRED
REQUIRED