IP COMMANDS
ip ifwait
Wait for a status change of an IP interface.
SYNTAX:
ip ifwait
where:
intf
timeout
adminstatus
operstatus
linkstatus
586
intf = <{loop|ipsec0|Internet|lan1|wan1|dmz1|
guest1}>
[timeout = <number{1-600000}>]
[adminstatus = <{down|up}>]
[operstatus = <{down|up}>]
[linkstatus = <{down|up}>]
An IP interface name.
The timeout in seconds.
The administrative state of the interface.
The operational state of the interface.
The link state of the interface.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL