Dyndns Modify - Technicolor TG670 Cli Reference Manual

dyndns modify

Modify a dynamic DNS client.
SYNTAX:
dyndns modify
where:
name
intf
user
password
group
mx
backmx
wildcard
offline
service
status
trace
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
name = <>
[intf = <{Internet|wan1}>]
[user = <string>]
[password = <password>]
[group = <>]
[mx = <string>]
[backmx = <{disabled|enabled}>]
[wildcard = <{disabled|enabled}>]
[offline = <{disabled|enabled}>]
[service = <{dyndns|statdns|custom|No-IP|
DtDNS|gnudip}>]
[status = <{disabled|enabled}>]
[trace = <{disabled|enabled}>]
The dynamic DNS client name.
The dynamic DNS client interface.
The username for dynamic DNS authentication.
The password for dynamic DNS authentication.
The dynamic DNS host group.
The mail exchanger.
Set up the mail exchanger as a backup MX.
Allow use of hostname wildcards.
Set the host to offline mode.
The dynamic DNS service.
Enable/Disable the dynamic DNS client.
Enable/Disable the verbose console logging for the dynamic
DNS client.
DYNDNS COMMANDS
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
325