Router Bgp Debug Traceconfig - Technicolor TG670 Cli Reference Manual

router bgp debug traceconfig

Configures the BGP daemon tracepoints
SYNTAX:
router bgp debug traceconfig
where:
all
state
normal
policy
task
timer
route
openrecv
updatesrecv
notifrecv
kaprecv
opensend
updatessend
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
[all = <{disabled|enabled}>]
[state = <{disabled|enabled}>]
[normal = <{disabled|enabled}>]
[policy = <{disabled|enabled}>]
[task = <{disabled|enabled}>]
[timer = <{disabled|enabled}>]
[route = <{disabled|enabled}>]
[openrecv = <{off|on|detailed}>]
[updatesrecv = <{off|on|detailed}>]
[notifrecv = <{off|on|detailed}>]
[kaprecv = <{off|on|detailed}>]
[opensend = <{off|on|detailed}>]
[updatessend = <{off|on|detailed}>]
[notifsend = <{off|on|detailed}>]
[kapsend = <{off|on|detailed}>]
[aspath = <{disabled|enabled}>]
Enable/Disable tracing of all events related with BGP
Enable/Disable tracing of protocol state transitions
Enable/Disable tracing of normal protocol occurrences
Enable/Disable tracing the policy functions
Enable/Disable tracing the routing processing associated
with BGP
Enable/Disable tracing the timer usage of BGP
Enable/Disable tracing the RIB table changes for routes
installed by BGP
Specifies the level of tracing the received 'OPEN' messages
Specifies the level of tracing the received 'UPDATE'
messages
Specifies the level of tracing the received
'NOTIFICATION' messages
Specifies the level of tracing of the received 'KEEP ALIVE'
messages
Specifies the level of tracing the sent 'OPEN' messages
Specifies the level of tracing the sent 'UPDATE' messages
ROUTER COMMANDS
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
853