Router Rip Config - Technicolor TG670 Cli Reference Manual

router rip config

Set the RIP daemon configuration settings.
SYNTAX:
router rip config
where:
state
updatetime
expiretime
garbagetime
defmetric
splithorizon
nohostroutes
ecmp
routesperdest
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
[state = <{disabled|enabled}>]
[updatetime = <number{5-3600}>]
[expiretime = <number{5-3600}>]
[garbagetime = <number{5-3600}>]
[defmetric = <number{1-15}>]
[splithorizon = <{simple|poison-reverse|no}>]
[nohostroutes = <{disabled|enabled}>]
[ecmp = <{disabled|enabled}>]
[routesperdest = <number{1-4}>]
Enable/Disable the RIP daemon.
Sets the RIP update timer value. Default is 30 seconds.
Sets the RIP expire timer value. Default is 180 seconds.
Sets the RIP garbage-collection timer value. Default is 120
seconds
Sets the default RIP metric (1-15) for routes imported from
other protocols.
Configures the split horizon technique.
Ignore host routes or not (RIPv2 only)
Enables/disables equal-cost-multi-path feature
Specifies the maximum number of RIP routes per
destination
ROUTER COMMANDS
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
893