Label Rule Debug Traceconfig - Technicolor TG670 Cli Reference Manual

LABEL COMMANDS

label rule debug traceconfig

Display/Modify rule trace configuration.
SYNTAX:
label rule debug traceconfig
where:
state
714
[state = <{disabled|enabled}>]
Disable/Enable rule traces.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
OPTIONAL