Eth Bridge Ifconfig - Technicolor TG670 Cli Reference Manual

eth bridge ifconfig

Modify a bridge interface configuration.
SYNTAX:
eth bridge ifconfig
where:
brname
intf
dest
portstate
retry
priotag
vlan
prioconfig
ipprec
priority
regenprio
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
[brname = <{bridge}>]
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4|WLAN|virt|vdsl2}>
[dest = <{}>]
[portstate = <{disabled|learning|forwarding}>]
[retry = <number{0-65535}>]
[priotag = <{disabled|enabled}>]
[vlan = <{default|wan|dmz|guest}>]
[prioconfig = <{disabled|overwrite|increase}>]
[ipprec = <{disabled|precedence|dscp}>]
[priority = <number{0-7}>]
[regenprio = <string>]
[ingressfiltering = <{disabled|enabled}>]
[acceptvlanonly = <{disabled|enabled}>]
[mcastfilter = <{disabled|enabled}>]
[dynvlan = <{disabled|enabled|switched}>]
[wan = <{disabled|enabled}>]
[igmpsnooping = <{disabled|enabled}>]
[priotransparent = <{disabled|enabled}>]
[bpdufiltering = <{disabled|enabled}>]
[xtratagging = <{none|c-vlan|s-vlan}>]
The name of a bridge instance.
The name of the bridge interface to configure.
The destination for this interface. Typically an ATM or a
physical interface name.
The bridge portstate for this interface.
The number of WAN connection setup retries before giving
up.
Enable/Disable priority tagging.
The default VLAN.
The priority configuration for this interface.
The IP precedence for this interface.
The default priority for untagged ingress packets.
The priority regeneration table for tagged ingress packets.
ETH COMMANDS
OPTIONAL
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
365