Router Rip Ifconfig - Technicolor TG670 Cli Reference Manual

ROUTER COMMANDS

router rip ifconfig

Configs an interface the RIP daemon will run on
SYNTAX:
router rip ifconfig
where:
intf
ripin
ripout
metricin
metricout
version
state
896
intf = <{Internet|dmz1|guest1|ipsec0|lan1|
wan1}>
[ripin = <{disabled|enabled}>]
[ripout = <{disabled|enabled}>]
[metricin = <number{1-16}>]
[metricout = <number{0-16}>]
[version = <{v1|v2|v2_broad}>]
[state = <{disabled|enabled}>]
Specifies the physical interface to configure.
Configures wether or not received RIP updates or going to
be processed.
Configures wether or not RIP updates or going to be sent.
Specifies the in-metric
Specifies an additional cost on outgoing interfaces
Specifies the version which will be run on the interface
Enable/Disable RIP on an interface
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL