Config Dump - Technicolor TG670 Cli Reference Manual

config dump

Show the saved configuration file
SYNTAX:
config dump
where:
sections
Modify global connection configuration.
SYNTAX:
config dump
where:
configchangemode
probes
udptrackmode
safepredicts
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
[sections = <string>]
Modify global connection configuration. =
<string>
Sections to be dumpedCommand: connection config
Syntax : config [configchangemode = <{immediate|
delayed}>] [probes = <{disabled|enabled}>] [udptrackmode =
<{strict|loose}>] [safepredicts = <{disabled|enabled}>]
[configchangemode = <{immediate|delayed}>]
[probes = <{disabled|enabled}>]
[udptrackmode = <{strict|loose}>]
[safepredicts = <{disabled|enabled}>]
Select how config changes are handled.
Enable/disable alive probes on idle connections.
UDP connection tracking mode.
Enable/disable safe CONN/NAT application helper
predictions (predicted connection must have same IP
addresses as its parent).
CONFIG COMMANDS
OPTIONAL
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
87