Eth Bridge Dynvlan Add - Technicolor TG670 Cli Reference Manual

ETH COMMANDS

eth bridge dynvlan add

Add a dynamic VLAN membership entry.
SYNTAX:
eth bridge dynvlan add
where:
id
hwaddr
vlan
prio
mode
346
[id = <number{0-100000}>]
hwaddr = <masked-hardware-address>
vlan = <{default|wan|dmz|guest}>
[prio = <number{0-7}>]
[mode = <{none|vid|prio|both}>]
The id of the dynamic VLAN membership entry.
The (masked) ethernet MAC address of the dynamic
VLAN membership entry.
The VLAN for the dynamic VLAN membership entry.
The new port priority to be set.
The flexiport mode of operation.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
OPTIONAL
REQUIRED
REQUIRED
OPTIONAL
OPTIONAL