Ip Commands - Technicolor TG670 Cli Reference Manual

ip Commands

ip arpadd
ip arpdelete
ip arplist
ip auto debug traceconfig
ip auto flush
ip auto ifadd
ip auto ifattach
ip auto ifconfig
ip auto ifdelete
ip auto ifdetach
ip auto iflist
ip config
ip debug httpprobe
ip debug sendto
ip debug stats
ip debug traceconfig
ip flush
ip ifattach
ip ifconfig
ip ifdelete
ip ifdetach
ip iflist
ip ifwait
ip ipadd
ip ipconfig
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
Add an entry to the ARP cache of a broadcast IP
interface.
Delete an ARP entry.
Display the ARP cache.
Modify autoIP trace configuration
Flushes autoIP interfaces.
Creates a new autoIP interface.
Select and assign a link-local address to an
autoIP interface.
Configures an autoIP interface.
Deletes an existing autoIP interface.
Release the link-local address for the given
autoIP interface.
Shows the autoIP interfaces.
Display/Modify global IP stack configuration.
Send HTTP probe to measure the round trip
time taken to connect and access
Send UDP packets.
Display statistics.
Display/Modify IP stack trace configuration.
Flush all static IP parameters. Dynamic info (e.g.
from PPP links) remains.
Attach an IP interface.
Modify an IP interface configuration.
Delete an IP interface.
Detach an IP interface.
Display all IP interfaces.
Wait for a status change of an IP interface.
Assign an IP address to an IP interface.
Modify an IP address configuration.
IP COMMANDS
see page 563
see page 564
see page 565
see page 566
see page 567
see page 568
see page 569
see page 570
see page 571
see page 572
see page 573
see page 574
see page 576
see page 577
see page 578
see page 579
see page 580
see page 581
see page 582
see page 583
see page 584
see page 585
see page 586
see page 587
see page 588
561