Mbus Client Register - Technicolor TG670 Cli Reference Manual

MBUS COMMANDS

mbus client register

Register cli client to mbus
SYNTAX:
mbus client register
where:
dmtree
type
dlink
mbusd_addr
refresolv
state_events
734
[dmtree = <{igd|atomic|system}>]
[type = <{indexpath|keystrpath}>]
[dlink = <{local_ipc|remote_inet}>]
[mbusd_addr = <quoted string>]
[refresolv = <{disabled|enabled}>]
[state_events = <{disabled|enabled}>]
Select mbusd datamodel tree.
Path type (default = indexpath)
Daemon link (default = local_ipc)
Daemon address (ip addr for inet)
Use reference resolving (default=disabled)
Context should be notified when the MBus state changes
(default=disabled)
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL