Language Delete - Technicolor TG670 Cli Reference Manual

LANGUAGE COMMANDS

language delete

Delete one or all language archives.
SYNTAX:
language delete
where:
file
all
Config the device checker
SYNTAX:
language delete
where:
state
physintf
flashing
vlan
722
[file = <string>]
[all = <{yes|no}>]
Config the device checker = <{yes|no}>
Filename : name of language archive to delete
Deletes all languages archives.Command: led devicecheck
config
Syntax : config [state = <{disabled|enabled}>] [physintf =
<{ethif1|ethif2|ethif3|ethif4|ethif5}>] [flashing = <{enabled|
disabled}>] [vlan = <{default|wan|dmz|guest}>]
[state = <{disabled|enabled}>]
[physintf = <{ethif1|ethif2|ethif3|ethif4|
ethif5}>]
[flashing = <{enabled|disabled}>]
[vlan = <{default|wan|dmz|guest}>]
Enable or disable device checker
The monitored port
Enable or disable the IPTV LED flashing
VLAN name
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
OPTIONAL
OPTIONAL
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL