Broadband Connection - Technicolor TG589vac Setup And User Manual

1.2.3 Broadband connection

Overview
DSL port
This port can be used to connect your TG589vac to your service provider's DSL network.
For more information, see
WAN port
The Gigabit Ethernet WAN port allows you to use your TG589vac as a local router.
For more information, see
Mobile Internet dongle (optional)
If you purchased the optional mobile Internet dongle, you can set-up a mobile data connection that can serve as a fallback
Internet connection.
For more information, see
PSTN Port (optional)
The PSTN port allows you to connect your TG589vac to the traditional telephone network, i.e. the Public Switched
Telephone Network (PSTN). When the VoIP connection is not available, your TG589vac will automatically switch from VoIP
to the traditional telephone network.
If your TG589vac does not have a PSTN port, this means that your TG589vac is VoIP-only. All calls passing through
your TG589vac will be done via VoIP.
Be aware that, if you are not connected to the traditional telephone network, emergency calls will not be possible
when your Internet connection is down or your TG589vac is powered off.
For more information, see
DMS3-CTC-25-226 v1.0. Copyright © 2016 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
DSL
"2.1 Connecting your TG589vac to your service provider's network" on page
"2.1 Connecting your TG589vac to your service provider's network" on page
"2.5 Set up a mobile fallback connection" on page
"2.3.1 Connection to the traditional telephone network" on page
WAN
13.
13.
20.
18.
1 Getting started
7