Start Up; Keypad - Siemens Milltronics BW500 Operating Lnstructions

Start Up

For successful start up, ensure that all related system components, such as the
Note:
belt scale and speed sensor, are properly installed and connected.
BW500 and BW500/L operates under two modes: RUN and PROGRAM. On initial power-
up, the unit starts in the PROGRAM mode.

Keypad

Key
In view mode: scrolls through
parameter list
decimal key
minus key
opens RUN mode
opens parameter direct entry
initiates calibration
clears entry
toggles between view and edit
modes, confirms parameter val-
ues
opens RUN mode
Page 28 Milltronics BW500 and BW500/L - OPERATING INSTRUCTIONS 7ML19985DK05
Function
PROGRAM mode RUN mode
changes PID local setpoint values
prints
switches PID between auto and
manual mode
opens PROGRAM mode
initiates calibration
changes RUN mode display
starts totalizer 1 reset sequence