Connections; Typical Ladder Logic; Programming - Siemens Milltronics BW500 Operating Lnstructions

Connections

Typical Ladder Logic

BW500 / RL1*
batch stop
47
BW500 / RL2*
pre-warm
49

Programming

The pre-warn function is optional.
The setpoint associated with the pre-warn relay is entered in P564, batch setpoint.
The setpoint associated with the batch relay is entered in P567, batch pre-warn setpoint.
Batch Operation
access P100, relay function
Access P560 Batch Mode Control
if batch pre-warn is selected
access P567, batch pre-warn setpoint
Access P568 Batch Pre-act
Relays
Access P100, Relay Function
Page 84 Milltronics BW500 and BW500/L - OPERATING INSTRUCTIONS
stop
48
50
BW500/
batch reset
aux 1

24

29
start
MC1
* Typical relay assignment. Relays 1-5 are
available for batch setpoint or pre-warm alarm
function.


Typical auxiliary input assignment. Inputs 1- 5
are available for batch reset.
select relay (1 – 5)
select function 7, pre-warn
select 1, enable batch operation
enter the pre-warn total
set to OFF (0) or AUTO (1) or manual (2)
select relay (1 – 5)
select function 7, Pre-Warn
motor contactor /
MC1
alarm
7ML19985DK05