Siemens Milltronics BW500 Operating Lnstructions page 164

Software
Revision
3.06 July 23, 2003
3.08 March 1, 2006
3.09 August 8, 2006
3.11 March 31, 2009
3.12 August 2009
Page 158 Milltronics BW500 and BW500/L - OPERATING INSTRUCTIONS 7ML19985DK05
Date
• Updated PID control between remote/
local setpoint
• Improve Dolphin Plus communications
• Batch setpoint now adjustable in "RUN"
mode
• Slowed down the display when scroll
key is held
• Remote zero and span calibrations
fixed
• Differential speed detection added
• Moisture meter added
• Inclinometer feature added
• Remote totalizer exceeded error fixed
• Totalizer dropout (P619) now limited to
3% or less when certification switch
enabled
• Second speed sensor accuracy at
frequencies below 10 Hz fixed
• Parameter download using Dolphin
Plus fixed (Dolphin Plus patch required)
• Electronic load cell balancing of C&D
fixed
• Word order format with remote
communication fixed
• Integrator serial number added to
printout
• Power failure message added to
printout
• Fixed word order for SmartLinx
Changes