Dolphin Protocol
The protocol is available on all communications ports on all units. This protocol is not
available for third party use.
The primary use of this protocol is to connect the BW500 and BW500/L to Siemens
Milltronics' Dolphin Plus configuration software.
Dolphin Plus Screen Shot
Tabs show groups
of parameters
Parameters have
roll-overs which
show number
Parameters can
be tracked while
the BW500 and
BW500/L is
running
7ML19985DK05Milltronics BW500 and BW500/L - OPERATING INSTRUCTIONS
The attached device
can be programmed,
debugged, and
monitored from
Dolphin Plus
The status bar
informs you of
program actions
and data transfer
status
Page 93