Interconnection; System Diagram - Siemens Milltronics BW500 Operating Lnstructions

Interconnection

Note:
• Wiring may be run via common conduit. However, these may not be run in the
same conduit as high voltage contact or power wiring.
• Ground shield at one point only.
• Insulate at junctions to prevent inadvertent grounding.

System Diagram

Typical system capability. Not all components or their maximum quantity may
Note:
be required
.
Page 14 Milltronics BW500 and BW500/L - OPERATING INSTRUCTIONS 7ML19985DK05
Milltronics
BW500 and BW500/
L
optional SmartLinx®
belt scale, see
Specifications
speed sensor,
optional, see
Specifications
mA output to
customer device
mA output to
customer device
(optional I/O board
required)
mA input from
customer device
(optional I/O board
required)
relay output, to
customer device
(2 for BW500/L)
auxiliary inputs
customer remote
totalizer
optional fieldbus
connection
(SmartLinx card
required)
communication
ports can be
configured for
Siemens
Milltronics Dolphin
Plus, print data, or
Modbus ASCII or
RTU protocol