Commissioning
3.4 Changing the SIMATIC HMI network settings
Procedure
1. Restart the SIMATIC HMI.
2. During the restart switch to the configuration menu by clicking the "Settings" button in the
Start Center.
Desktop and Start Center (Page 16)
3. Adapt the IP address of the SIMATIC HMI to the network of the gas analyzers by opening
"Enter IP address and name server" in the Control Panel.
Entering the IP address and name server (Page 17)
4. Change the connection data for the PLC by opening "Edit IP addresses and communication
connections" in the Control Panel.
Editing IP addresses and communication connections (Page 19)
5. Start the SITRANS AID IQ in the Start Center with the button "Start".
Call up SITRANS AID IQ on the SIMATIC HMI (Page 27)
3.4.1
Desktop and Start Center
Once the HMI device has been started, the display shows the desktop.
①
②
③
④
16
Desktop
Start Center
Start menu
Icon for screen keyboard
Analyzer Intelligence Director
Operating Instructions, 05/2022, A5E51328515-AA