Material Test - Siemens Milltronics BW500 Operating Lnstructions

if % change is negative, remember to enter the minus sign, e.g. -1.3
P017 Test Load Weight: MS1
Enter Test Load

Material Test

Access P019 and enter EDIT mode
P019 Manual Span Adjust
Select 1-% Change 2-Material Test
Press
Material Test
Add to Totalizer 0-No, 1-Yes
Press
Material Test
Press ENTER to start
Press
Material Test
Press ENTER key to stop
Press
Material Test
Enter actual amount
Press
Material Test Deviation
Accept 0-No, 1-Yes
Press
P017 Test Load Weight: MS1
Enter Test Load
Page 44 Milltronics BW500 and BW500/L - OPERATING INSTRUCTIONS 7ML19985DK05
e.g. the new test load value is displayed
V
56.78
E
0
if yes, the weight of the material test will
be added to the totalizer, if no, material is
added to test totalizer (4) only.
e.g. do not add weight of material test to
totalizer
the totalizer reading as the material test is
tonnes
run
#.### t
e.g. the weight totalized by the belt scale
964.032 t
and BW500 and BW500/L
tonnes
e.g. 975.633 kg is the actual weight of the
material test
e.g. the calculated deviation is displayed
-1.19
as a % of the actual weight
e.g. the new test load value is displayed.
V
56.78