Manual Pulse Generator - Mitsubishi Q170MCPU User Manual

2 SYSTEM CONFIGURATION

2.5.5 Manual pulse generator

(1) Manual pulse generator specifications
Item
Model name
Ambient temperature
Pulse resolution
Output method
Power supply voltage
Current consumption [mA]
Life time
Permitted axial loads
Mass [kg]
Number of max. revolution
Pulse signal status
Start friction torque
(Note-1) : Use MR-HDP01 by connecting with Q173DPX.
(Note-2) : If a separate power supply is used, use a stabilized power supply of voltage 5VDC ±
0.25V.
MR-HDP01
-10 to 60°C(14 to 140°F)
25PLS/rev(100 PLS/rev after magnification by 4)
Voltage-output/Output current : Up to 20mA
4.5 to 13.2VDC
1,000,000 revolutions or more (at 200r/min)
Radial load : Up to 19.6N, Thrust load : Up to 9.8N
Instantaneous Up to 600r/min. normal 200r/min
2 signals : A phase, B : phase, 90° phase difference
0.06N•m (20°C (68°F) )
2 - 47
Specifications
(Note-1)
(Note-2)
60
0.4