Mitsubishi Q170MCPU User Manual page 113

4 INSTALLATION AND WIRING
Push the battery holder fixing tab.
Pull the battery holder while
pushing the battery holder fixing
tab, and remove the holder from
the Motion controller.
Remove the connector from the
battery holder by pulling straight
out.
(Note)
Remove the battery lead connector
and battery connector for Motion
controller.
(b) Removal
1)
2)
3)
4)
END
1)
Push
Battery holder
3)
(Note): Do not pull on the lead wire forcibly to remove the connector.
4 - 16
Motion controller
Battery holder fixing tab
2)
Pull
Battery connector
4)
(Q170MCPU side)
Battery lead
connector
(Battery side)