Mitsubishi Q170MCPU User Manual page 183

APPENDICES
POINT
The Find CPU function can be used for specifying the Motion controller IP address
in the connection via HUB.
This function can be activated in [Find CPU (Built-in Ethernet port) on Network] of
CPU side I/F Detailed Setting of PLC Module screen, finds the Motion controller
connected to the same HUB as MT Developer2, and displays a list.
• Set the label and comment of the Motion controller in [CPU Name Setting] of Basic
Setting.
The label and comment set in [CPU Name Setting] are displayed on the CPU side
I/F Detailed Setting of PLC Module screen.
Item
Label Enter a label (name and/or purpose) of the Motion controller.
Comment Enter comments regarding the Motion controller.
Description
APP - 12
Found Motion controller
is displayed.
[Find CPU (Built-in
Ethernet port) on
Network] button
Setting range
Up to 10 characters
Up to 64 characters