Mitsubishi Q170MCPU User Manual page 111

4 INSTALLATION AND WIRING
Push the battery holder fixing tab.
Pull the battery holder while
pushing the battery holder fixing
tab, and remove the holder from
the Motion controller.
Move the connector away from the
battery disconnection prevention
hook, and then remove it by pulling
straight out.
Remove the battery lead connector
and battery connector for Motion
controller.
(b) Removal
(Note)
END
1)
2)
3)
Push
1)
Battery holder
4)
3)
(Note): Do not pull on the lead wire forcibly to remove the connector.
4 - 14
Motion controller
Battery holder fixing tab
2)
Pull
Battery connector
4)
(Q170MCPU side)
Battery lead
connector
(Battery side)
Battery disconnection
prevention hook
Top face of battery holder
3)