Mitsubishi Q170MCPU User Manual page 39

2 SYSTEM CONFIGURATION
Part name Model name
MR-J3BUS M
SSCNET cable
MR-J3BUS M-A
MR-J3BUS M-B
(Note-4)
(Note-1) :
(Note-2) : Be sure to use the cable for forced stop input (sold separately). The forced stop cannot be released
(Note-3) : 5VDC internal current consumption of shared equipments with PLC might be changed.
(Note-4) : Please contact your nearest Mitsubishi sales representative for the cable of less than 30m(98.43ft.).
Motion controller related module(continued)
(Note-1)
• Q170MCPU
• MR-J3- B
• Standard cord for inside panel
• 0.15m(0.49ft.), 0.3m(0.98ft.), 0.5m(1.64ft.), 1m(3,28ft.), 3m(9.84ft.)
• Q170MCPU
• MR-J3- B
• Standard cable for outside panel
• 5m(16.40ft.), 10m(32.81ft.), 20m(65.62ft.)
• Q170MCPU
• MR-J3- B
• Long distance cable
• 30m(98.43ft.), 40m(131.23ft.), 50m(164.04ft.)
=Cable length (015: 0.15m(0.49ft.), 03: 0.3m(0.98ft.), 05: 0.5m(1.64ft.), 1: 1m(3.28ft.), 2: 2m(6.56ft.),
3: 3m(9.84ft.), 5: 5m(16.40ft.), 10: 10m(32.81ft.), 20: 20m(65.62ft.), 25: 25m(82.02ft.),
30: 30m(98.43ft.), 40: 40m(131.23ft.), 50:50m(164.04ft.)
without using it.
Cable for forced stop input is not attached to the Motion controller. Please purchase the cable for length
according to system separately.
Be sure to refer to the MELSEC-Q series PLC Manuals.
Description
MR-J3- B
MR-J3- B
MR-J3- B
MR-J3- B
MR-J3- B
MR-J3- B
2 - 12
Current
consumption Remark
5VDC[A]
——
——
——