Controlling The Insert Effects Via Midi - Korg Krome Parameter Manual

Effect Guide
Controlling the Insert Effects
via MIDI
Using the Dynamic Modulation (Dmod) function enables
you to control all effect parameters in real‐time during
performance from the controllers of the KROME or a
connected MIDI sequencer. You can also control the Pan:
CC#8, Send1, and Send2 parameters in the same way.
Program mode
You can control the parameters on the global MIDI channel
(Global 1–1a).
Combination mode
The P8: Routing/IFX– IFX1–5 page lets you specify the
control channel Ch (Control Channel) for IFX1–5. You can
choose from CH01–16, Gch, or All‐R (All Routed).
Ch01–16: Select this when you want to control each insert
effect from a different channel. An "*" symbol will be
displayed at the right of the MIDI channel Ch01–16 of the
timbre that is routed to each insert effect. If the routed
timbres have different MIDI channel settings, this parameter
is used to specify the channel that will control the insert
effect.
Gch: Select this option if you wish to control the parameters
on the global MIDI channel (Global 1–1a). This is a common
setting.
All-R: Select this option to control the parameters on all the
channels (channels 1–16 that have a "*" mark) that are
routed to the corresponding Insert Effects.
If you've selected a drum program for a Combination
mode timbre or a Sequencer mode track, and set its Bus
(IFX/Output) Select to DKit (8–1(2)d), the MIDI
channel of that timbre/track will be valid if any one of
IFX1–5 is set to All‐R, regardless of the drum kit's Bus
(IFX/Output) Select (Global 5–5b) setting or the menu
command DrumKit IFX Patch setting.
Sequencer mode
Use Ch parameters of the P8: Routing/IFX– IFX1 – IFX5
pages to set up the control channels for IFX1–5. Select an
appropriate option from Ch01–16 and All Routed.
Ch01–16: Select this when you want to control each insert
effect from a different channel. An "*" symbol will be
displayed at the right of the MIDI channel Ch01–16 of the
track that is routed to each insert effect. If two or more tracks
with differing MIDI channels Ch01–16 are being sent to a
single insert effect, this parameter is used to specify the one
track that will control the insert effect.
All R: Select this option to control the parameters on all the
channels (channels 1–16 that have a "*" mark) that are
routed to the corresponding Insert Effects. All R is a typical
option. If you wish to control the parameters on a single
channel, you may select it from Ch01–16.
Note: Since Sequencer mode lets you record and play
exclusive messages and edit tracks that include System
Exclusive events, you can use them to switch effects or
modify effect parameter values during song playback.
244