Initiating A Conference From The Conference History Screen; Answering Or Rejecting A Call - Huawei TP3106-55 User Manual

HUAWEI TP3106-55 Telepresence
User Guide
If both local and remote codecs are registered with the same gatekeeper, you can call the site using its number.
Step 3 Tap
Tap
number, or URI of the site you wish to call.
----End

5.1.4 Initiating a Conference from the Conference History Screen

The telepresence system automatically saves the records of all conferences it initiated or
attended. From the touch panel, you can view all conference records and select one of the
conferences to hold the conference again.
Procedure
Step 1 From the Call screen, tap the Conference History tab.
Step 2 Tap a conference to start it.
----End

5.2 Answering or Rejecting a Call

Tap
an answer mode for the local site.
l
l
Issue 02 (2013-01-16)
NOTE
to start the conference.
NOTE
to display the full alphanumeric keypad. From this keypad, you can enter the IP address, site
NOTE
l To search for a conference, enter the conference name or number in the search field, and tap
l Tap
to view and edit the call settings. For details about the parameter description, see
5-1. Tap to place the call.
l Tap to view the site name, site number, site type, transmission rate, and call type for an entry.
l If a conference has only a single remote participant site, tap
rate, and call type of that site. If a conference has multiple remote participant sites, tapping
display only the names and numbers of those sites.
> Settings > Advanced Settings > Conference Settings. Set Answer mode to specify
In Auto mode, the system answers the call and joins a conference automatically.
In Manual mode, the system displays a message prompting to either:
– Tap Answer to answer the call and join the conference.
– Tap Reject to reject the call.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Starting a Conference
to view the name, number, type, call
.
Table
will
30