Operating The Tester In Edit Mode - Test Equipment Depot 990DSL User Manual

Table 3-2. Operating the Tester in Edit Mode
If you want to
Put the tester in Edit mode
Enter numbers, asterisk (*) or
pound sign (#)
Enter alphabetic characters
Exit alphabetic text entry
mode and return to numeric
entry mode
Move the cursor forward one
position without changing the
displayed character
Move the cursor backward
one position without changing
the displayed character
Move the cursor back one
position and overwrite the
previous character
Exit Edit mode and save the
changes
Exit Edit mode, without
saving the changes
Restore factory default setup
values
Setting Up and Operating the CopperPro
Press A(Edit).
Type the values directly from the keypad by
pressing the number keys, asterisk (*), or
pound sign (#).
Press > to put the tester in alphabetic text
entry mode. Then, press the key with the
desired alphabetic character. Keep pressing
the key until the desired alphabetic character
is displayed.
Press >.
Press G.
Press I.
Press M.
Press L.
Press A(Edit).
Press D(Restore Defaults).
The Menus
Do this
3
3-9