990DSL
Users Guide
3.
If the
Cable Length
•
Press A(
(five digits maximum, no commas), and / or a
if known to be non-standard.
•
When finished, press D(
Type based on the entered data, using the same
as measured on the good pair.
4.
If the
Cable Length
•
Press D(
same
3T Cap. Ratio
4-18
value is not correct:
), then enter a known good value for
Adjust
Save as Custom
value is correct:
) to create a Custom Cable Type with the
Save as Custom
value as measured on the good pair.
Cable Length
Cap. Reference
) to create a Custom Cable
3T Cap. Ratio
value
value