Adjusting The Volume Of The Speaker; Displaying System Information - Test Equipment Depot 990DSL User Manual

990DSL
Users Guide

Adjusting the Volume of the Speaker

The CopperPro has a speaker that emits a distinctive sound when a key is
pressed or when certain testing operations are being performed.
To increase or decrease the volume of the sound, do the following:
1. Press >. Then, press F to increase the volume or H to decrease the
volume.
When you press the arrow key, the speaker emits a tone at the newly
adjusted volume, giving you a sample of the level of sound.
2. When the volume is acceptable to you, press > again.
The new setting is saved in memory and remains in effect even after you
turn off the tester.

Displaying System Information

To find out what version of software you have or what options are installed on
the tester, complete the following:
1. Press > then
2. Select
System Version
The
System Version
tester:
•
Software version loaded
•
Top assembly hardware revision
•
Installed options (if any).
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
3-22 FAX 781.665.0780 - TestEquipmentDepot.com
O
to display the
. Press L.
screen displays the following information about the
menu (Figure 3-4).
USER OPTIONS