Setting Up A Dial-Up Test - Test Equipment Depot 990DSL User Manual

990DSL
Users Guide

Setting Up a Dial-Up Test

To set up a Dial-Up test, do the following:
1. Enter the setup parameters for all associated subtests shown in Table 4-13:
Table 4-13. Dial-Up Tests and Associated Subtests
Dial-Up Test
Milliwatt VF Loss
(C.O. Tone sending device)
Quiet Term. VF Noise
(C.O. Quiet Termination)
VF Long. Balance
(C.O. Quiet Termination)
Number ANI
(C.O. Smart-Pro / ANAC device)
On-Hook Caller ID
(Test line with Caller ID feature)
Call Waiting Caller ID
(Test line with Caller ID feature)
Monitor Line
Smart-Pro Test Group
(C.O. Smart-Pro unit)
SASS Test Group
(C.O. SASS unit)
DATU Test Group
(C.O. DATU & Switch NTT)
4-54
Associated Subtests
VF Loss test
VF Noise test
VF Long. Balance test
None
None
None
None
VF Loss, VF Noise, Caller ID tests
VF Loss & VF Noise tests
Opens, Shorts & Grounds & other
desired tests