Storing The Serial Number And Property Information - Test Equipment Depot 990DSL User Manual

990DSL
Users Guide

Storing the Serial Number and Property Information

If desired, you can store the serial number and owner information for your
CopperPro in the tester's memory.
To store property information for the tester, follow these steps:
1. Press > then O to display the
2. Select
Company Info
The
Company Info
field.
Name
3. To supply information on this screen, complete the following:
Zipcode
characters. All other parameters can consist of up to 30
alphanumeric characters.
a) Position the cursor on the desired field. Then, press A(
b) Use the keypad to enter alphabetic or numeric information.
To enter alphabetic information, press > to put the tester in Shift
mode. Then, press the desired alphabetic key until the character you
want is displayed. Press G to advance the cursor to the next position
and type the next character. Continue in this manner until the desired
information is displayed.
To enter numeric information, press the desired number key. Press G
to advance the cursor to the next position and type the next number.
Continue in this manner until all of the information you want is
displayed.
c) Press L to save.
3-16
. Press L.
. screen is displayed. The cursor is positioned on the
and . can consist of up to 16 alphanumeric
Phone No
USER OPTIONS
Note
menu (Figure 3-4).
).
Edit