990DSL
Users Guide
POTS Auto-Test
The POTS Auto-Test is a sequence of user-selectable single-ended parametric
and transmission tests. The test can be run on either spare or working POTS
pairs, with the appropriate selected tests automatically performed. It is an ideal
tool to qualify POTS pairs, as well as providing an overview for fault analysis.
Table 4-1 lists the individual tests that comprise the POTS Auto-Test. All but
the first two tests are user selectable, which gives you the flexibility to
customize an Auto-Test that fits your particular testing situation.
Setting Up a POTS Auto-Test
To set up a POTS Auto-Test, complete the following:
1.
From the
2.
Press D(
The
Setups−POTS Auto-Test
Figure 4-1. POTS Auto-Test Setup Screen 1
4-2
menu, select the
Main
).
Setups
POTS Auto-Test
screen 1 (Figure 4-1) is displayed:
.
acy11s.eps