990DSL
Users Guide
2.
Press D(
System Setups
The
System Setups
parameters. The cursor is positioned on
The information you supply for each parameter on this screen can be
up to 30 alphanumeric characters long.
System Setups
3.
To supply an operator name, press A(
type the name. When you finish, press L.
Consult Table 3-2 for assistance with operating the tester in the Edit
mode.
3-18
). Press L.
screen (Figure 3-5) is displayed. This screen has four
Note
Operator Name -
Wire Center
Location
Job Number
To include Operator Name, Location, & Job
Number in Saved Test Results Header, press
"Include All" below :
Edit
Figure 3-5. System Setups Screen
Note
Operator Name
- FLEETWOOD CO
- 2144 Adams St.
- 1021-4443
Include
All
). In the
Edit
.
List Wire
Centers
acy09s.eps
field,
Operator Name