•
Charging status LED (C)
A bicolor (red and green) LED that indicates the charging status of the
internal battery pack (see "Charging the Battery" for details).
Back Panel
The tester's back panel is shown in Figure 2-2. This panel contains a speaker
(item A) and a microphone (item B). The speaker and microphone enable you
to use the CopperPro as a dial set (see "Operating the Tester as a Dial Set" in
Chapter 3 for instructions).
Controls and Connections
The CopperPro Loop Tester: at a Glance
Figure 2-2. Back Panel
2
1
2
acy04f.eps
2-7