Opens Test Results - Test Equipment Depot 990DSL User Manual

990DSL
Users Guide

Opens Test Results

To run an Opens test, see "Starting and Stopping a Test in the POTS Toolbox".
Figure 4-7 shows a result screen from an Opens test that was conducted on a
good, balanced pair:
Depending on the results you obtain, you may want to run additional tests on
the pair. From the Opens test results screen, you can do the following:
•
Press A(
Adjusted Opens
mutual capacitance value (see "Adjusted Opens Test" for details).
•
Press B(
Contin. Opens
•
Press C(
Splits
later in this chapter).
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
4-16 FAX 781.665.0780 - TestEquipmentDepot.com
Figure 4-7. Opens Test Result: Good Pair
) to calibrate the pair to a known length or
) to run the test continuously on a selected leg.
) if the pair is known to be a split pair (see "Splits Test"
acy18s.eps