Setting The Date And Time - Test Equipment Depot 990DSL User Manual

Setting the Date and Time

To set the date and time, follow these steps:
1. Press >, then O to display the
2. Select
Date/Time
The
Date/Time
3. Press H to move the cursor down to the
). Then, press G to select one of the following formats for
A(
Edit
displaying the time:
•
12-hour (default)
•
24-hour
Press L to save your selection.
4. Press H to move the cursor down to the
). Then, press G to select one of the following formats for the date:
A(
Edit
•
MM/DD/YYYY
•
DD.MM.YYYY
Press L to save your selection.
5. Press F to move the cursor up to the
To do this, complete the following:
a) Press A(
save the value.
b) Press G to move the cursor to the Minutes field. Press A(
the minutes, then press L to save the value.
c) If you selected
cursor to the Time of Day field. Press A(
or , then press L to save the selection.
PM
Setting Up and Operating the CopperPro
. Press L.
menu is displayed.
). In the Hour field, type the hour. Then press L to
Edit
as the time format, press G to move the
12-hour
Configuring the Tester
USER OPTIONS
Time Display Mode
Date Display Mode
Current Time
). Press H to select
Edit
menu (Figure 3-4).
field. Press
field. Press
field and set the time.
). Type
Edit
3
AM
3-11