Running A Terminated Vf Test - Test Equipment Depot 990DSL User Manual

990DSL
Users Guide
a) From the POTS Toolbox, select
b) From the
c) Enter a setting for Loop Resistance, Ground Resistance, and
Unbalance Resistance Pass Thresholds.

Running a Terminated VF Test

This procedure shows you how to run a
can use this procedure to run any of the tests in this group.
To run a Terminated VF Test, do the following:
1. From
Select Terminated Test Type,
The Terminator VF Auto-Test connection diagram is displayed as shown
in Figure 4-32:
Figure 4-32. Terminator VF Auto-Test Selection Screen
4-68
Select Terminated Test Type
Terminated VF Tests
screen, press D(
Terminator VF Auto-Test
press A(
Terminator VF Auto-Test
and press L.
).
Setups
. You
).
acy107s.eps