990DSL
Users Manual
Storing Test Results Automatically
The CopperPro features an automatic test storage option that saves the text-
based results of all non-continuous tests except Auto-Tests. All relevant test
data is saved and any failures (those results that exceed a preset Pass/Fail
threshold) are highlighted in reverse video. Auto-Test results must be manually
saved, as they require specific Test Identification information prior to storage.
The automatic test storage option allows you automatically store text-based
files only. You must manually save graphical files (see "Saving a Displayed
Waveform or Frequency Graph"), as well as text results for the Auto-Tests.
The automatic test storage option is enabled when the tester is shipped from
the factory. If you want to turn off the option, do the following:
1.
On the tester's front panel, press N.
The
Saved Results
Saved Results
Figure 7-1. Saved Results Selection Screen
The
Results Storage
7-4
selection screen (Figure 7-1) is displayed:
Results Storage:
Select Viewing Option
View TDR
View Text
Results
Waveforms
field shows that automatic test storage is
Enabled
View Freq.
Graphs
acy91s.eps
.
Enabled