Saving Terminated Wb Test Results - Test Equipment Depot 990DSL User Manual

c) C (
FED WB Auto-Test
WB Auto-Test, but employs either a FED or FEDII as the far-end
device. The CMC "My Helper" operates the same as the FED units.
All the above Auto-Tests are similar in operation. However, only the
TN2100 "Terminator" is capable of sending composite, wideband
tone-sets. As a result, the Terminator WB Auto-Test is much faster,
and yields more comprehensive test results.
2. The
WB Auto-Test
device is displayed.
3. Connect the units as shown in the displayed connection diagram, select the
desired test option (
The CopperPro displays on-screen the test it is currently running. When
completed, a Summary Results screen is displayed similar to that shown in
Figure 5-3 under "DSL Auto-Test Results".
4. Refer to procedures described earlier in the DSL Auto-Test section to
view detailed results.

Saving Terminated WB Test Results

Refer to the procedure in "Saving DSL Auto-Test Results" for saving
Terminated WB Test results.
XDSL Testing and Loop Qualification
) – This function is similar to the Terminator
Note
connection diagram for the corresponding far-end
or
Pair 1 Test Pair 2 Test
The XDSL Toolbox
), and press K.
5
5-31