Table of Contents
Advertisement
990DSL
Users Guide
Starting and Stopping a POTS Auto-Test
You can start a POTS Auto-Test in one of two ways:
•
From the
press K.
OR
•
From the
The POTS Auto-Test begins, running each of the tests that you specified in the
setup.
To stop a POTS Auto-Test at any time, press K.
POTS Auto-Test Results
While the Auto-Test is running, the CopperPro displays the test it is currently
performing. When it is completed, a Test Summary screen is displayed,
showing each test and whether it passed or failed, as shown in Figure 4-2:
Figure 4-2. POTS Auto-Test Summary Results
4-6
menu (Figure 3-2), select
Main
Setups - POTS Auto-Test
POTS Auto-Test
screen, press K.
. Then,
acy101s.eps
Advertisement
Table of Contents
